KaliLinux 2017.1: Install isc-dhcp-server for DHCP server

Install isc-dhcp-server with apt.

$ sudo apt install -y isc-dhcp-server

Add configuration for DHCPDv4. INTERFACESv4 is a network interface name which is connected to a network which you try to provided DHCP.

$ INTERFACESv4=eth0
$ sudo sed -e 's/^#DHCPDv4_CONF=/DHCPDv4_CONF=/g' \
     -e 's/^#DHCPDv4_PID=/DHCPDv4_PID=/g' \
     -e "s/INTERFACESv4=\"\"/INTERFACESv4=\"${INTERFACESv4}\"/g" \
     -i /etc/default/isc-dhcp-server

Define domain name, DHCP server IP address and gateway IP address. Mapping MAC address 52:54:00:c0:07:60 to IP address 192.168.11.128.

$ cat /etc/dhcp/dhcpd.conf
subnet 192.168.11.0 netmask 255.255.255.0 {
  option domain-name "my.net";
  option domain-name-servers 192.168.11.2, 192.168.11.1;
  option routers 192.168.11.1;
}

host dhcp-client {
  hardware ethernet 52:54:00:e9:ee:38;
  fixed-address 192.168.11.128;
}

Run isc-dhpc-server with systemd.

$ sudo systemctl enable isc-dhcp-server
$ sudo systemctl restart isc-dhcp-server

Run the following command on client machine.

IP address is provided.

$ ip a s
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
group default qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
state UP group default qlen 1000
    link/ether 52:54:00:c0:07:60 brd ff:ff:ff:ff:ff:ff
    inet 192.168.11.128/24 brd 192.168.11.255 scope global dynamic eth0
       valid_lft 43148sec preferred_lft 43148sec
    inet6 fe80::5054:ff:fec0:760/64 scope link
       valid_lft forever preferred_lft forever

DNS servers are provided.

$ cat /etc/resolv.conf
# Generated by NetworkManager
search hiroom2.com
nameserver 192.168.11.2
nameserver 192.168.11.1