This article will describe changing GRUB2 and Linux to serial console.
Table of Contents
1 /etc/default/grub
Change /etc/default/grub as below.
- Change GRUB terminal to console and ttyS0. This will provide one GRUB to a monitor display and serial console.
- Change linux kernel console to tty1 and ttyS0. This setting will be taken over to userland, and there will be two login prompt for tty1 and ttyS0.
#!/bin/sh sudo cp /etc/default/grub /etc/default/grub.orig cat <<EOF | sudo tee /etc/default/grub GRUB_TIMEOUT=1 GRUB_DISTRIBUTOR= GRUB_DEFAULT=saved GRUB_DISABLE_SUBMENU=true GRUB_TERMINAL="console serial" GRUB_CMDLINE_LINUX="console=tty1 console=ttyS0,115200 loglevel=4" GRUB_CMDLINE_LINUX_DEFAULT="resume=/dev/system/swap" GRUB_SERIAL_COMMAND=\ "serial --speed=115200 --unit=0 --word=8 --parity=no --stop=1" EOF sudo grub2-mkconfig -o /boot/grub2/grub.cfg sudo reboot
2 Execution result
GRUB to monitor display is as below.
GRUB to serial console is as below. This article used "sudo virsh console <vmname>" for connecting serial console.
Login prompt to monitor display is as below. tty1 is displayed with press Ctrl + Alt + F1.
Login prompt to serial console is as below.
